DJI Phantom 4 Phantom 4 Pro Gimbal Camera Yaw Roll Bracket Phantom 4 4 Pro Pitch Roll Yaw Motor USED

DJI Phantom 4 Phantom 4 Pro Gimbal Camera Yaw Roll Bracket Phantom 4 4 Pro Pitch Roll Yaw Motor USED

1: Yaw Motor for DJI Phantom 4 (New Version)

2: Yaw Motor for DJI Phantom 4 (Old Version)

3: Roll Motor for DJI Phantom 4

4: Pitch Motor for DJI Phantom 4

5: Yaw Bracket for DJI Phantom 4

6: Roll Bracket for DJI Phantom 4

7: Yaw Motor for DJI Phantom 4 Pro (New Version) =Yaw Motor for DJI Phantom 4 (New Version)

8: Roll Motor for DJI Phantom 4 Pro=Roll Bracket for DJI Phantom 4

9: Pitch Motor for DJI Phantom 4 Pro

10: Yaw Bracket for DJI Phantom 4 Pro

11: Roll Bracket for DJI Phantom 4 Pro

1: Yaw Motor for DJI Phantom 4 (New Version)

2: Yaw Motor for DJI Phantom 4 (Old Version)

3: Roll Motor for DJI Phantom 4

4: Pitch Motor for DJI Phantom 4

5: Yaw Bracket for DJI Phantom 4

6: Roll Bracket for DJI Phantom 4

7: Yaw Motor for DJI Phantom 4 Pro (New Version) =Yaw Motor for DJI Phantom 4 (New Version)

8: Roll Motor for DJI Phantom 4 Pro

9: Pitch Motor for DJI Phantom 4 Pro

10: Yaw Bracket for DJI Phantom 4 Pro

11: Roll Bracket for DJI Phantom 4 Pro

Tips 1:

Please note that   these Motors are used.   But it works because we tested before sell.

For now,nobody have this new these Motors because dji company forbid to sell.

Tips 2:

Kindly reminder: These parts require professionals and professional tools to replace. Especially the Y motor, it need professinal tool to fix and replace. We recommend that you check with your local professinal repairnan before buy it.

Tips 3:

If the gimbal camera doesn't fixed in the center after install the Y motor, pls following below steps to settle the problem.

Step 1: Measure the deviation angle of the gimbal camera;

Step 2: Measure and mark making on the counterclockwise direction of the metal plate   (the one for motor, above the shock-absorbing plate, next to the flat cable);

Step 3: Drill a screw hole with an electric drill on the metal plate. (If the gimbal camera go to the left deviation of 45 degrees, then pls drill a hole of 45 degrees to the right.)

Step 4: Install the Y motor.