BP2080 SLCD Battery Internal Resistance Tester Leadnickel chromium Tester 0-1 AF
MENU AND OPERATION
1, Normal Test
To press Enter key to power on the meter, system will go to normal test. In this mode, user can test the resistance and voltage of the battery directly, with connecting the positive and negative of battery through Kelvin probes or clips. The test value is showing on the LCD. Then user can judge the quality of the battery. There are 20mΩ, 200mΩ, 2Ω, 20Ω, 200Ω, AUTOR for resistance test, and 1v, 10V,100, AUTOV for voltage test. As for AUTOR and AUTOV, the meter will test the resistance and voltage by switching the appropriate range automatically. User can also set different range of resistance and voltage manually through + key and – key for more accuracy.
Hold Enter key more than 1 second, the meter will power off.
2, Sort Test
Power on the meter, press Menu Key to show the menu, press Menu_Select key to find Sort Test. Then press Enter key to go to sort test mode. In this mode, testing function is as same as that in normal test mode, however, user can sort the batteries by the ranged which is set in Sort Mode Set, if the test of batteries is out of that range, the meter will show NO and buzzer will beep continuously, and show PASS if in set range and buzzer just beep one time. In this case ,user can depart the good quality batteries from bad ones by range setting.
3, Black Light Set
Power on the meter, press Menu Key to show the menu, press Menu_Select key to find Black Light Set. Then press Enter key to go to Black Light Set. First step is to select black light setting mode: TRIGGER, ON, OFF through R+ key or V- key. The meter will light the black light when you select ON , and turn off black light when selecting OFF despite delay time setting.
When user select TRIGGER, then go to second step to set delay time through Menu_Select key. Delay time can be set from 5 seconds to 60 seconds through R+ key and V- key. After set delay time, you have to hold Enter key more than 1 second till “OK” occurred, then the setting will be confirmed. Default setting is.30 seconds.
4, Power Saving
Power on the meter, press Menu Key to show the menu, press Menu_Select key to find Power Saving. Then press Enter key to go to Power Saving Set. First step is to set shut down: ON, OFF through R+ key or V- key. The meter will never shut down when you select OFF despite delay time setting.
When user select ON, then go to second step to set delay time through Menu_Select key. Delay time can be set from 1 minute to 10 minutes through R+ key and V- key. After set delay time, you have to hold Enter key more than 1 second till “OK” occurred, then the setting will be confirmed. Default setting is.5 minutes.
1, Lead acid battery (unit: mΩ)
item capacity voltage resistance item capacity voltage resistance
2 1.3 AH 12V 102.00 150AH 12V 4.00
4 3.3 AH 12V 55.70 34 200AH 12V 3.00
6 5.0 AH 12V 37.40 36 250AH 12V 1.00
11 10 AH 12V 18.70 37 1.3AH 6V 55.00
14 15 AH 12V 13.00 41 5 AH 6V 18.30
17 20 AH 12V 10.60 43 10 AH 6V 12.00
19 25 AH 12V 9.50 44 110 AH 6V 4.30
22 31 AH 12V 8.60 45 200 AH 6V 1.70
25 40 AH 12V 7.90 46 100 AH 2V 1.00
26 60 AH 12V 6.50 49 200 AH 2V 0.70
27 65 AH 12V 5.80 51 300 AH 2V 0.65
28 75 AH 12V 5.50 57 500 AH 2V 0.40
2, Lithium battery(unit: mΩ)
type capacity voltage resistance
18650 2000m AH 3.7V 30~60
26650 3200mAH 3.7V 20~50
3, Nickle battery(unit: mΩ)
type capacity voltage resistance
NIMH 2000maH 1.2V 10~50
NiCD 2000mAH 1.2V <10
4, high rate LiPo battery, 3.7V(unit: mΩ)
capacity rate resistance capacity rate resistance
650mah 25C 17.39 1000mah 20C 14.70
1300mah 25C 6.0~7.0 1500mah 25C 4.0~5.5
1800mah 25C 3.0~4.0 2200mah 25C 2.0~3.0
3300mah 35C 1.5 4200mah 35C 1.3
5200mah 35C 1.1 8000mah 25C 0.98
12000mah 25C 0.88 16000mah 25C 0.55~0.68
22000mah 20C 0.45~0.55 32000mah 20C 0.30~0.45
